复模：即真空灌注，真空复模是使用原有的样板，在真空状态下制造出硅胶模具，并在真空状态下选用PU资料进行浇注，然后克隆出与原样板相同的，比原样板耐高温，强度和硬度都要好的复制造，假如客户请求做几套或几十套时，适合用这种办法，这么大大降低了成本。

Re molding: that is, vacuum pouring. Vacuum re molding is to use the original template to manufacture silica gel mold under vacuum, select Pu data for pouring under vacuum, and then clone the same as the original template, which is better than the original template in high temperature resistance, strength and hardness. This method is suitable if the customer requests to make several or dozens of sets, This greatly reduces the cost.

工艺处理：采用CNC、SLA、Complex三种方法制作的样品进行采样、抛光和组装。这个程序是把所有零件制成一个产品。喷油：根据客户的要求，在无尘室内环境中喷涂色彩，使手板样品更加生动、华丽，增加手板样品的真实感。丝网印刷：在我们手版的样板平面上印刷或绘画。印刷：印刷或画在手板的不平整表面上。这一工艺要求在丝绸印刷的基础上再加一块板。

Process treatment: samples made by CNC, SLA and complex are sampled, polished and assembled. This procedure is to make all parts into one product. Fuel injection: according to the requirements of customers, spray colors in the dust-free indoor environment to make the hand board samples more vivid and gorgeous and increase the authenticity of the hand board samples. Screen printing: printing or painting on the sample plane of our hand plate. Printing: printing or painting on an uneven surface of a hand board. This process requires an additional plate on the basis of silk printing.

镭雕刻：用激光去除商品外观上的油漆，使部分方向透明。例如：手机键、汽车DVD键。透镜等。

Radium carving: use laser to remove the paint on the appearance of goods to make some directions transparent. For example: mobile phone key, car DVD key. Lens, etc.

电镀：对于一些更引人注目的产品，涂一层银色的商业颜色，电镀前的样品需要非常润滑。未发现任何杂质，然后浸入化学溶液中。过操作分为：水和真空。

Electroplating: for some more eye-catching products, apply a layer of silver commercial color, and the samples before electroplating need to be very lubricated. No impurities were found and immersed in a chemical solution. Over operation is divided into water and vacuum.

氧化：即阳极处理，使铝的外观发生氧化反应，形成膜，使物品不易划伤。

Oxidation: that is, anodic treatment to oxidize the appearance of aluminum and form a film, so that the articles are not easy to scratch.

拉丝：拉出铝材外表面的细小痕迹，使试样感觉更好。

Wire drawing: pull out small traces on the outer surface of aluminum to make the sample feel better.

高光：对外部加工过的铝样品，加工一圈高速CNC，以揭示铝的性质。

Highlight: for externally processed aluminum samples, process a circle of high-speed CNC to reveal the properties of aluminum.

UV上：在商品外表面喷洒一层透明的油，用紫外光干燥，使商品更亮、无花朵，如保护层。

UV: spray a layer of transparent oil on the outer surface of the commodity and dry it with ultraviolet light to make the commodity brighter and free of flowers, such as protective layer.

浮雕：在平面上，用手工雕刻一些标志或人物、动物、植物等功能。

Relief: on the plane, manually carve some signs or characters, animals, plants and other functions.

泥塑：一些斑点或文字、动物、植物等的外观。是用红泥雕刻的。车床：有一个夹头可以容纳各种数据，形成椭圆、圆杯等。

Clay sculpture: the appearance of some spots or words, animals, plants, etc. It was carved in red clay. Lathe: there is a chuck that can hold all kinds of data to form ellipses, round cups, etc.

磨光机：靠近CNC，但它是一个由手动和自动开关控制的拱型床。

Grinder: close to CNC, but it is an arch bed controlled by manual and automatic switches.

喷沙：在手板表面喷上一层沙子，使手板样品看起来更、更。

Sand blasting: spray a layer of sand on the surface of the hand board to make the hand board sample look more and.

本文由济南手板整理发布，您是不是对这些内容有所了解了呢?更多的内容请点击：http://www.metferro.com我们会有更多精彩内容等你查看。

This article is compiled and released by Jinan Shouban. Do you know something about these contents? For more information, please click: http://www.metferro.com We will have more wonderful content for you to see.