公司新闻
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人：王经理
电话：0531-88670722
手机 : 15866677695
地址：济南市天桥区梓东大道鑫茂科技城143号楼102室
手板模型加工方式之复模加工！
来源：http://www.metferro.com作者：山东嘉瑞杰机械科技有限公司发布时间：2021-04-22
手板模型复模的制作工艺：
The manufacturing process of the replica of the hand board model is as follows
开模具方式有包模、刷模（分片模、立体模、平面模）、灌注模，这是根据产品的大小来决定的。
The mold opening modes include package mold, brush mold (divided mold, three-dimensional mold, plane mold) and pouring mold, which are determined according to the size of the product.
包模：先在模种上包一层厚度为3~5mm的泥土,做石膏外套，除去泥土渍脱模种，把搅拌好的硅胶和固化剂倒入套有模种的石膏外套，固化成 型。
Mold wrapping: first, wrap a layer of 3 ~ 5mm thick soil on the mold seed, make a plaster coat, remove the soil stains, demould the mold seed, pour the stirred silica gel and curing agent into the plaster coat with mold seed, and solidify.
刷模：一般刷三层式根据模具要求多层，一层刷在模种上抽真空，刷到位。二层贴纱布。三层盖面固化成型。
Brush mold: General brush three layers, according to the mold requirements of multi-layer, a layer of brush on the mold vacuum, brush in place. Two layers of gauze. Three layer cover curing molding.
灌注模：把搅拌均匀的硅胶和固化剂倒入围好模种的容器中，抽真空固化成型。有的不能直接取出模种的还须开刀脱模，以便生产顺利。
Pouring mold: pour the silica gel and curing agent evenly into the container surrounding the mold seed, and vacuum to solidify. Some can not be directly taken out of the mold also have to cut demoulding, in order to smooth production.
手板硅胶特点：粘度低，流动性好，好操作、缩水率小，不变形，缩率在千分之二。收缩率大的话，生产出的产品会变小，其他液体变成固 体后会变形、耐高温。
Characteristics of handboard silica gel: low viscosity, good fluidity, easy operation, small shrinkage, no deformation, shrinkage of 2 / 1000. If the shrinkage rate is large, the product will be smaller, and other liquids will be deformed and resistant to high temperature when they become solid.
手板复模与CNC手板加工的区别：
The difference between the manual mould and CNC manual processing is as follows:
1、加工方式的区别：
1. Differences in processing methods:
采用的是车床加工需要一个一个手板的进行锣，而真空复膜则是做一个原版后，再根据原版做出一个硅胶模具后进行复制。
The use of a lathe processing requires a manual Gong, and vacuum lamination is to make an original, and then according to the original to make a silicone mold to copy.
2、材料区别：
2. Material difference:
制作的手板一般的常见的ABS、PP、亚克力等材料，而真空复膜做出来确是妨ABS、PP、亚克力材料。
The hand board is made of common ABS, PP, acrylic and other materials, and the vacuum lamination is really harmful to ABS, PP, acrylic materials.
3、加工时间的区别：
3. Processing time difference:
真空复膜只要做出硅胶模具后就可复制，一般一个硅胶模具可出8-15个产品，时间上要比CNC加工快很多。
Vacuum lamination can be copied as long as the silicone mold is made. Generally, a silicone mold can produce 8-15 products, which is much faster than CNC processing.
4、精度区别：
4. Accuracy difference:
CNC加工的精度会比真空复膜出来的精度要高很多。
The precision of CNC machining will be much higher than that of vacuum laminating.
5、表面处理的区别：
5. Difference of surface treatment:
手板模型表面处理比如喷油，一般CNC制作出来的手板可以喷完油后放入烤箱烤干，而真空复膜出来的却只能自然风干。
Hand model surface treatment, such as oil spray, the general CNC made hand can spray oil into the oven to dry, while the vacuum film out of the hand can only dry naturally.
感谢您的阅读，希望以上内容对您有所帮助，如您想了解更多精彩内容请点击我们的官网：济南手板http://www.metferro.com。
Thank you for reading, hope the above content is helpful to you, if you want to know more wonderful content, please click our official website: Jinan Shouban http://www.metferro.com .
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些？
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些？
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27
