手板模型是一种用3d打印技术制作出来的模型，如今使用是非常广泛的。比如日常生活中常见的电器手板、对讲门铃等通讯商品手板等就是手板模型产品。在使用济南手板模型的过程中是一定要注意做好维护保养的，这样才能延长寿命，更好的进行使用，下面这些保养方法可以参考一下。

Prototype model is a kind of model made by 3D printing technology, which is widely used nowadays. For example, the common electrical appliances and intercom doorbells in daily life are the prototype products of the prototype. In the process of using the Jinan prototype, you must pay attention to the maintenance, so as to prolong the service life and better use. The following maintenance methods can be referred to.

1、不能够直接接触明火或者电的，因为手板模型抗高温性能很一般，遇到明火处着电的话容易受损。

1. It is not allowed to directly contact with open fire or electricity, because the high-temperature resistance of the prototype model is very general, and it is easy to be damaged in case of electricity at the open fire.

2、要远离食盐、盐酸、苦卤等物质，因为镀层在这些物质中是会被腐蚀。还有手板模型不能够和84液、漂白粉等物质接触。

2. Keep away from salt, hydrochloric acid, bittern and other substances, because the coating will be corroded in these substances. Also, the hand model cannot be contacted with 84 disinfectant, bleach and other substances.

3、要经常使用热水清洗手板模型，但是不能够用带腐蚀性的清洁剂去清洗。

3. Hot water should be often used to clean the hand model, but not enough corrosive detergent.

4、要放置在的地方，不能够放在有媒体、煤球炉和煤烟熏烤的地方。否则镀层受到一氧化碳的影响会出现黑色网状裂纹或者锈蚀。

4. It should be placed in a safe place, not in a place with media, coal ball furnace and coal smoke. Otherwise, the coating will be affected by carbon monoxide and black network cracks or rust will appear.

5、不要用锋利的器皿去接触，也不能够用重物压，否则会让手板模型出现变形或者受损的情况。

5. Do not use sharp utensils to touch or press with heavy objects, otherwise the model will be deformed or damaged.

6、定期擦拭手板模型，可以用软布蘸上清水擦拭。一定不可使用机油或者类似的溶液擦拭，否则手板模型镀层很容易被毁掉。

6. Wipe the hand model regularly. You can use a soft cloth dipped in water to wipe. Do not use engine oil or similar solution to wipe, otherwise the plating of the prototype model will be easily destroyed.

7、要存放在干净的阴凉的盒子或者柜子里面，避免把手板模型放在扬尘大的地方，因为手板模型是比较容易吸尘的。

7. It should be stored in a clean and cool box or cabinet, and avoid placing the hand model in a place with large dust, because the hand model is easy to dust.

总之，手板模型是一定要注意维护保养的，毕竟制作出来大家都希望它能够有良好的使用效果，注意维护保养才能够让手板模型维持良好状态，同时也是能够延长使用寿命的。以上这几点保养方法是非常有效的，大家按要求去做就能够见到效果。相关注意事项就来我们网站http://www.metferro.com咨询了解吧。

In short, we must pay attention to the maintenance of the prototype. After all, we all hope that it can have a good use effect. Only by paying attention to the maintenance can the prototype maintain a good state and prolong its service life. The above maintenance methods are very effective. You can see the effect if you do as required. Relevant precautions come to our website http://www.metferro.com Consult and understand.