Handboard is a verification process that must be carried out before mass production of products, or if the quantity and performance of the products are not so high and the industrial products can be produced in small batch, what methods can be used for processing small batch of plastic handboards? Now Jinan handmade small edition for you to analyze.

　　小批量塑胶手板加工可以采用哪些方法

　　What methods can be used to process small batch of plastic handboards

　　一、硅胶复模小批量生产

　　1、 Small batch production of silica gel replica

　　硅胶复模小批量生产的工艺流程就是先用3D打印一个产品模型作为模种，然后利用这个模种，周围填充硅胶，做成一个硅胶模具，模具干了后，拿出模种，就变成了一个硅胶模具，往模具里面填充相应的塑胶材料，就可以小批量生产塑胶手板了。

　　The technological process of small batch production of silica gel mold is to print a product model in 3D as a mold type, and then use this mold type to fill silica gel around to make a silica gel mold. When the mold is dry, take out the mold type, and it becomes a silica gel mold. Fill the mold with corresponding plastic materials, and then small batch production of plastic handboards can be achieved.

　　硅胶复模小批量生产的产品材料比较多，一般常见的是ABS，pla，pc，软胶等材料，对于一些结构相对简单的产品来说，硅胶复模生产，还是不错的选择。

　　There are a lot of materials in small batch production of silica gel replica. Generally, ABS, PLA, PC, soft rubber and other materials are common. For some products with relatively simple structure, silica gel replica production is a good choice.
               

　　二、3D打印尼龙小批量生产

　　2、 Small batch production of 3D printing nylon

　　3D打印是新出现的加工工艺，由于3D打印尼龙材料具有良好的物理机械性能，适合做功能性手板和部分行业的终端产品，特别是一些结构比较复杂的工业件可以采用尼龙材料3D打印。

　　3D printing is a new processing technology. Due to the good physical and mechanical properties of 3D printing nylon material, it is suitable for functional handboards and terminal products of some industries, especially for some industrial parts with complex structure, 3D printing of nylon material can be used.

　　3D打印尼龙材料手板不需要加支撑，所以适合做比较复杂的结构，而且材料强度高，韧性好，打印速度快，适合小批量生产手板。

　　3D printing nylon material hand board does not need to be supported, so it is suitable for complex structure, and the material has high strength, good toughness, fast printing speed, suitable for small batch production of hand board.

　　小批量手板加工成本便宜，生产制造周期时间较短，小批量生产一般就是指几十到上百个的数量，这些数量的手板模型假如选用CNC生产加工得话，所消耗的成本和时间是非常多的，而3d打印尽管效率会很高。

　　The cost of small batch handboards is cheap and the manufacturing cycle time is short. Small batch production generally refers to tens to hundreds of quantities. If the handboard models of these quantities are produced and processed by CNC, the cost and time consumed are very much, while 3D printing will be very efficient.

　　以上是关于小批量塑胶手板加工的方法，由济南手板整理提供，想要了解更多欢迎咨询http://www.metferro.com网站。

　　The above is about the processing method of small batch of plastic handboards, which is provided by Jinan handboard finishing. If you want to know more, please contact us http://www.metferro.com Website.