通常還需要進行小量的試產進而找出批量里的不足加以改善。設計完成產品一般不能做到很*，通常有缺陷，有的甚*無法使用，直接生產一旦有缺陷將全部報廢，大大浪費人力和物力和時間

A small amount of trial production is usually needed to find out the shortcomings in the batch to improve. The finished product is generally not perfect, usually defective, and some even can not be used. Once the key production is directly disabled, it will be totally wasted, which will be a great waste of manpower and material resources and time.

而手板制作一般情況是少數的樣品，制作周期短，損耗人力物力少，很快地找出產品設計的不足進而改善，為產品大規模生產提供充足的依據。減少產品次品及報廢率。

The general situation of hand making is a few samples, with short production cycle, less manpower and material resources, and quickly finding out the shortcomings of product design, so as to provide sufficient basis for mass production of products. Reduce product subproduct and scrap rate.

*步：編程：編程人員分析3D數據，編寫控制數控加工中心的程式語言;

 

青島手板

 

The first step: Programming: the programmer analyses the 3D data and writes the programming language to control the NC machining center.

第二步：CNC加工：把整理好的程式語言輸入計算機控制加工中心，執行程式命令;

The second step: CNC processing: input the compiled programming language into the computer control processing center and execute the program command.

第三步：手工處理：整理出加工之后的產品。主要完成的內容包括：校對數據、毛邊、粘接、打磨拋光等;

The third step: manual processing: finishing the processed products. The main contents include: proofreading data, cleaning edge, bonding, polishing and polishing, etc.

第四步：表面處理：完成效果圖中的各種表面效果，常用的為噴漆、絲印、電鍍、特殊的有鐳雕、陽極氧化、拉絲等;

The fourth step: surface treatment: finish the various surface effects in the effect diagram, commonly used for spray painting, screen printing, electroplating, special radium carving, anodizing, drawing and so on.

第五步：組裝：處理后就是對裝配問題進行數據檢測，需要在表面處理之前進行試組裝;

The fifth step: assembly: after processing, data detection is done to the assembly problem, and it needs to be assembled before the surface treatment.

第六步：包裝：*后產品通過QC部門檢測合格之后就入庫!*此，手板模型制作基本完成了。

The sixth step: packing: the final product is qualified after the QC department is tested. At this point, the hand model production is basically completed.

本文的精彩內容來自青島手板詳細內容請點擊我們的網站:http://www.metferro.com謝謝您的到來!

The wonderful content of this article comes from the detailed content of Qingdao hand board, please click on our official website: http://www.metferro.com thank you for coming!