强度高

High strength

聚氨酯铸造（复模）的材料有刚性或柔性的塑料。复模的手板模型件通常比注塑件坚韧，并且比3D打印件的强度更好。

The materials used for polyurethane casting (re molding) include rigid or flexible plastics. The prototype parts of the replica are usually stronger than injection molded parts and have better strength than 3D printed parts.

扩展性好

Good scalability

聚氨酯铸造（复模）工艺适用于数量从一数百的小批量生产。平均而言，一个硅胶硅胶模具可以精确地铸造约20-25个手板零件，数量因零件设计和材料铸造而异。

The polyurethane casting (re molding) process is suitable for small batch production in quantities ranging from one to hundreds. On average, a silicone mold can accurately cast approximately 20-25 hand board parts, with the maximum number varying depending on part design and material casting.

材料多

Multiple materials

聚氨酯铸造（复模）可以提供各种刚性和柔性的材料，可以选择做软胶；也可以做ABS、PC等塑胶，目前模世家手板模型还攻克了各种耐高温和防火材料。而且复模零件的颜色可根据您的要求进行混合选择。

Polyurethane casting (replica) can provide various rigid and flexible materials, and can be chosen as a soft adhesive; It can also be made of ABS, PC and other plastics. Currently, Moshijia's hand board models have also conquered various high-temperature and fire-resistant materials. And the colors of the replica parts can be mixed and selected according to your requirements.

交期快

Fast delivery time

聚氨酯铸造（复模）因为模具制作时间短，可以根据您的原型很快做出硅胶模具，

Polyurethane casting (re molding) can quickly make silicone molds based on your prototype due to the short mold production time,

在5-15个工作内就可以出货， 相比同类产品，注塑件的周期都是需要数月才能完成。

It can be shipped within 5-15 working hours, and compared to similar products, the cycle of injection molded parts takes several months to complete.

本文由济南手板为您提供，我们的网站是:http://www.metferro.com将以全心全意的热情为您提供服务，欢迎您的访问！

This article is provided by Jinan Handboard, and our website is: http://www.metferro.com We will provide you with wholehearted enthusiasm and welcome your visit!