在手板模型加工过程中咱们会尽量避免有失误的情况出现，但是在定制加工工作当中，想要不犯错几率很小。那么北京手板模型加工出错之后如何补救？

We will try our best to avoid errors in the process of prototype processing, but in customized processing, the probability of not making mistakes is very low. So how can we remedy any errors in the processing of the Beijing prototype?

1、一些手板模型出现较大的失误就不可补救了，只能报废，像透明件PMMA，PC等，因为透明工件是不许有粘接痕迹的。

1. Some prototype models with significant errors cannot be remedied and can only be scrapped, such as transparent parts such as PMMA and PC, as transparent parts are not allowed to have adhesive marks.

2、一些工件是可以进行补救的，工件为非透明件，像ABS，POM，PA等，一般都是针对塑胶件进行补救。补救的方法一般可用补救材料填在过切或错切的地方，常用的补救材料是502胶水混合痱子粉或原子灰。取适量痱子粉加入502胶水调成稀糊状即可成为502胶水混合痱子粉，将调好的材料填入过切的地方待干后再补加工一下即可。

2. Some workpieces can be remedied, and they are non transparent, such as ABS, POM, PA, etc. Generally, they are remedied for plastic parts. The remedial method can generally be filled with remedial materials in the area of over cutting or miscutting, and the commonly used remedial materials are 502 glue mixed with prickly heat powder or atomic ash. Take an appropriate amount of prickly heat powder and add 502 glue to make a thin paste. Mix the mixture of 502 glue and prickly heat powder. Fill the cut area with the prepared material and let it dry before further processing.

要注意：

Please note:

对生产程序进行规划，提高材料使用率的同时提高工作效率。我们在北京手板模型加工之前，一定要了解加工内容，根据加工的内容合理的安排安装基面、加工基面，这样就能实现对原材料进行一个合理的采购，提高材料的利用率，减少浪费的同时也提高了手板加工的效率。

Plan the production process to improve material utilization while improving work efficiency. Before processing the prototype in Beijing, we must understand the processing content and arrange the installation and processing of the substrate reasonably according to the processing content. This can achieve a reasonable procurement of raw materials, improve material utilization, reduce waste, and improve the efficiency of prototype processing.

注意在多次成型过程中产生的热变形在制作复杂零件的时候，虽然要经过多次的成型的技术，但是为了获得精美的零件的话，我们一定要注意在加工的过程中由于热产生的变形，我们一定要在制作安装的过程中小心零件的尺寸。

Pay attention to the thermal deformation generated during multiple forming processes. When making complex parts, although multiple forming techniques are required, in order to obtain exquisite parts, we must pay attention to the deformation caused by heat during the processing. We must be careful about the size of the parts during the manufacturing and installation process.

手板加工过程中因为材料性能很脆易裂，又不能有粘接痕迹，在加工过程中要特别注意，在加工手板模型的时候一定是需要非常的谨慎、专注的。更多相关的信息就来我们网站http://www.metferro.com进行咨询吧！

During the processing of the hand board, due to the brittle and easily cracked material properties and the absence of adhesive marks, special attention should be paid during the processing. When processing the hand board model, it is necessary to be very cautious and focused. For more relevant information, come to our website http://www.metferro.com Let's consult!